Driver Modem Huawei E303 Telkomsel Flash Wifi Card

Huawei E303 Mobile Broadband 3g dongle; My telehone company provided. MODEM HUAWEI MIFI E5220 + TELKOMSEL FLASH WIFI; MODEM HUAWEI. Sub-models If you are MAC OS user then you should use Huawei data card client.

A guy I personally know got a USB modem from the UK and the modem was locked to 3, a UK mobile network. On getting to Nigeria here, he found out the modem wouldn’t work with SIM card. The modem prompted for an unlock code and this dude kept guessing till he entered it incorrectly ten times.

He rendered the modem useless and even couldn’t unlock it. I tried all I could but it didn’t work.

I decided to try flashing the modem and re-installed the firmware but still, the unlock counter still read 10. Wiedzmin 1 Iso Chomikuj Darmowa. Before the modem finally became useable again, I did three things to flash it: 1.

Reset the unlock counter 2. Upgrade the firmware 3.

May 31, 2017. How to Create a Visual Logic Flowchart. Visual Logic also enables you to run simple programs without. This instructs Visual Logic to multiple the. Microsoft released Visual Basic in 1987. It was the first visual. 1 A Guide to Working with Visual Logic For Loops and Nested Loops. 10 A Guide to Working with. 2463 + 2464 +DefaultVendor.7.2 MiB Firmware Huawei E303 Ms-2 21.158.13.00.473 (MTN Congo) 8.4 MiB Firmware Huawei E303s 21.158.13.00.717 don't update the normal modem.Cannot detect 'Mobilelink ML27 Telkomsel Flash' modem in I am able to detect the 'Mobilelink HSUPA 7.2 Mbps Model ML27' USB.

Install a different dashboard 1. How to Reset the Unlock Counter Must Read: Like I said earlier, upgrading the firmware did not reset the unlock counter which read 10 out of 10. I had to reset the counter with a software first.

If you haven’t entered your unlock code 10 times like the guy in question did, you should skip this step. Of course, you can still do it if you want to unlock your modem and anyway.

– Download – Extract the content and run the.exe file inside – Click on Refresh. Your modem should be automatically detected so far you checked AUTO CONNECTION under connection mode – Be sure Auto-Calc Code and Auto-Unlock Modem are both marked – Click READ MDM DATA – Now click UNLOCK. This should both unlock your modem and reset the counter at the same time – Lastly, click on Calculate to generate the flash code. You’re gonna be needing it later. Must Read: 2. Upgrade your Modem Firmware – First, you must download the right firmware for your modem. You can download it from their but I prefer and recommend Update: These sites don’t seem to have the firmwares anymore.

You can always check, or website. – Select Huawei or what model your modem is and click the tiny modem icon – On the next page, select your model and click the same modem icon again. – Now, download Firmware Update and Dashboard Update Now to upgrade the firmware, unzip the firmware update you downloaded and double-click the.exe file. – Accept the agreement and proceed. – The program searches for your modem for some seconds – On the next page, simply hit the Next button – When the flashing starts, be sure you follow the instruction on-screen. Do not remove your modem and be sure you have enough poer on your laptop or UPS to last for about 30 minutes. – When you hit the start button, you may be prompted to enter your Flash code.

This only happens when the new firmware version is different from the existing one on the device. Remember the Flash code you generated earlier? Enter it here.

– The process starts and normally, this should take less than 10 minutes. – At this point, you don’t have to do anything. Just wait till you see a message that looks like this: – Congratulations!

You just upgraded you modem firmware successfully! Installing a different dashboard Even with an upgraded firmware, I was still seeing that same dashboard that came from 3 network. The dashboard wouldn’t let any me use any other SIM though the modem is already unlocked. I had to install a different dashboard to make me use our network provider settings here in Nigeria. It’s here you’ll be needing the Dashboard Update file you downloaded.

– Unzip the file and run the executable file – Accept the agreement and continue – Again, the software should search for your device -Hit the Next button as before and the procedure is very much similar to the firmware upgrade you did earlier. Easy, isn’t it? It’s more like installing a software on your computer.

Also, this should take less than five minutes to complete and after that, you should have a different modem software that’s not branded with your home network logo and customizations. Now you’ve successfully flashed your modem.

I used this method to flash a “permanently locked” modem with 10 wrong unlock attempts and it worked fine. Filed Under: Hashtags.

I got error to reset lock counter on my airtel 3g modem E1731 I follow your above steps but my modem doesn’t accept the counter reset code. Here is my details of my modem. Found modem: E1731 Model: Huawei E1731 (Airtel India) IMEI: 73093 Serial NR.: 8CABYA Firmware: 11.126.29.00.284 Compile date / time: Aug 13 2012 19:28:09 Hardware ver.: CD1E153M Dashboard version: UTPS23.001.07.06.910_LNX23_myModem.in Chipset: Qualcomm MSM6290 Voice feature: disabled SIM Lock status: Locked (customized firmware) Wrong codes entered: 10 (unlock attempts left: 0). I already followed many tutorials and at last I unlocked my huwaei ec156 modem which was given me with my tata photon+ connection.Though I unlocked it using DFS and followed all d procedures without any fail. Ultimately,I downloaded the firmware of my device from huwaei, it is ” EC156Update_11.106.00.06.000.B416.exe”. Please help me out I have crazy john’s huawei e173 datacard from australia, i have directly reinstalled the mobile patner software, with out updating the frimware, now the dongle is not working only green light blinks often. I have tried to reinstall the frimware n dashboard but the software says no device detected.

Mujhse dosti karoge movie download single link. It shows error msg 2 “The data card can not be found Error code:2 One of the following reasons may cause the errors: a. The data card in not connected to PC. Other program is using the data card. You don not have the authority of the administrator.” I have also tried by changing the sim but result is the same.

Please help me to get it unlocked. Thanks in advance. Av Bishoujo Senshi Girl Fighting.

Hi, I have this crazy E173 3.75G airtel modem. The first time i slotted-in a different sim, i was told invalid sim. I got interested in unlocking the modem after reading your blog. I downloaded the dc unlocker u made avaiable on your blog page, i was given an error code, helix string and some craps i don’t understand. I even tried using the Huaweii modem unlocker (also from your blog), updated the firm ware and the dash board using the methods u described. My crazy modem still refuses to unlock. Please, I need your help.

Hello Don, I recently gave my son a Huawei USB modem which was initially working properly with a boardband dashboard. But now whenever I connect it to the laptop, it has a mobile partner dashboard and the Huawei e160 modem gives error: “device is disconnected or is unavailable”. The boy had tried to flash it. I have tried connecting the device to some other computers to see if the device gets detected, I am getting the same problem. It is faulty and the computers cannot communicate with the device again.

I’ll appreciate Thanks in advance. How can I find the firmware for Found modem: E5220s-2 Model: Huawei E5220 IMEI: 06211 Serial NR.: E6BBY1 Firmware: 21.143.15.00.999 Compile date / time: Nov 07 2013 11:45:50 Hardware ver.: CH1E5220SM Dashboard version: UTPSTOOL-ConnLaucher_WIN1.12.07.00_MAC1.12.08.00 Voice feature: unknown(read failed)(read failed) SIM Lock status: unlocked Wrong codes entered: 0 (unlock attempts left: 10) as in the installed cooked firmware, I cannot add or change the Network profile (APN) Anybody can help, please!!!

I have a airtel 3G E8231 huawei wingle modem. A few days ago I have download two files from net 1) E8231 firmware update-india version, 2) hilin dashboard webui 13.100.00.01 life belarus and keep it in a folder in pc E drive. Then accidentally I select file 2) hilin. For firmware update of my modem instead of E8231 firmware update.

Thereafter my modem is in half dead condition. Just I connect my modem in the pc a web page Altel 4G dashboard and modem is neither connect to net nor wifi signal is found. Is there any solution or it will throw in dustbin? That huawei modem unlocker software is just the bomb dude.

Where the heck you got it from by the way? I have been able to permanently unlock my modem with that for months without a problem. It can even upgrade my speeds. My modem is huawei e173 u-1.

It seems the firmware is locked completely but huawei modem unlocker software has helped me use my modem like a piece of cake just with temporary unlocking. But do you know of similar software for Ubuntu linux? You guy are a genius by the way. Hi Bro, I am facing below problem, as i followed your steps giving below error Details are like below DC – Unlocker 2 Client 1.00.0460 Detecting card: selection: manufacturer – ZTE datacards model – Auto detect Found modem: MF190 Model: Unknown ZTE modem IMEI: 68175 Firmware: ZTMF190DT02 SIM Lock status: Locked (Card Lock) Unlocking, please wait Security data error! Unlock failed! (error code 84) Could you please give me Solution of it.

Thanks & Regards, Majed Khan. Good day sir, pls am having a problem trying to flash my modem, i downloaded the firmware from huaweifirmwares,com, its a e173-u2 firmware. The problem is that it wont install after download. After accepting, it show searching for data card.

After searching for sometime time, it will say error. Data card not properly place on pc or its currenlt being used by another application or not authorized from administrator. Pls what do i do or how do i go about it? I already generated the new algo unlock code and flash code. Flashing the firmware is where the problem is now. Pls i need help on what to do about it or how to properly install the firmware to detect the data card.

Dear Don, I just stumbled upon this page, And I was looking for a solution / work around on an issue that I am facing, I recently purchased a Huawei E303 Data Stick from UK which is an unlocked, and it is currently on HiLink Version of software, I require to downgrade it but to my luck no previous versions detect the modem as the communication does not show / transmit through COM Ports. I require to downgrade this device to an older version in order to detect it as a Serial Modem where I could do some tests on this device but due to it being Hi-Link version I am unable to do so Any Suggestions? Hi Don, I have a Datacard, Huawei E3276s-920, Firmware Version: 21.260.05.00.209, Software Version: 23.015.02.00.03.

Connection Manager( Mobile Partner 23.015.02.00.03) has some features deactivated like USSD, Data Volume Limit etc. I have customized Mobile Partner Software by Editing in some config files inside and made active as per my required features and archived( Common+SysConfig.dat) to data.bin,now clicking on setup.exe,it is installed manually and working fine. I am not using original auto installed Software. How can I flash this customized software into the modem permanently. Please tell me the procedures in details.

Excellent tutorial. Was able to unlock and reinstall latest firmware to my Virgin Australia Huawei E1762 HSPA USB Modem while visiting India and then use local Indian sim card on my 3G WiFi Modem to get net access, this was a great help.

All up took approximately 45 minutes to 1 hour including removing the bloatware dashboard, which I had to google around for a bit as the link to the dc-files website is obsolete and the dashboard file wasn’t quickly identifiable for my device. Tested and USB stick worked on Airtel and Vodafone. So permanently unlocked, rebooted and now online. This will also benefit me when I head back home and also when travelling to other countries now.

The robots are coming.

• Download all the software / firmware from the link which is provided at the end of the article. • Now run Universal Master code software, select Huawei tab and generate flash code for your modem.

• Now run the download firmware file of Huawei E303 modem and when ask for password / flash code then provide the flash code (which you generated earlier) as your password. • Now wait for finish the flash process. • Now Close any runing software / dashboard / connection manager.

• Run the CardLock_Unlock software / tool. • Now put your 8 digit unlock code into the unlock code box and click on OK. • Now you will get message “Unlock Success”.

Huawei E303 Mobile Broadband 3g dongle; My telehone company provided. MODEM HUAWEI MIFI E5220 + TELKOMSEL FLASH WIFI; MODEM HUAWEI. Sub-models If you are MAC OS user then you should use Huawei data card client.

A guy I personally know got a USB modem from the UK and the modem was locked to 3, a UK mobile network. On getting to Nigeria here, he found out the modem wouldn’t work with SIM card. The modem prompted for an unlock code and this dude kept guessing till he entered it incorrectly ten times.

He rendered the modem useless and even couldn’t unlock it. I tried all I could but it didn’t work.

I decided to try flashing the modem and re-installed the firmware but still, the unlock counter still read 10. Wiedzmin 1 Iso Chomikuj Darmowa. Before the modem finally became useable again, I did three things to flash it: 1.

Reset the unlock counter 2. Upgrade the firmware 3.

May 31, 2017. How to Create a Visual Logic Flowchart. Visual Logic also enables you to run simple programs without. This instructs Visual Logic to multiple the. Microsoft released Visual Basic in 1987. It was the first visual. 1 A Guide to Working with Visual Logic For Loops and Nested Loops. 10 A Guide to Working with. 2463 + 2464 +DefaultVendor.7.2 MiB Firmware Huawei E303 Ms-2 21.158.13.00.473 (MTN Congo) 8.4 MiB Firmware Huawei E303s 21.158.13.00.717 don't update the normal modem.Cannot detect 'Mobilelink ML27 Telkomsel Flash' modem in I am able to detect the 'Mobilelink HSUPA 7.2 Mbps Model ML27' USB.

Install a different dashboard 1. How to Reset the Unlock Counter Must Read: Like I said earlier, upgrading the firmware did not reset the unlock counter which read 10 out of 10. I had to reset the counter with a software first.

If you haven’t entered your unlock code 10 times like the guy in question did, you should skip this step. Of course, you can still do it if you want to unlock your modem and anyway.

– Download – Extract the content and run the.exe file inside – Click on Refresh. Your modem should be automatically detected so far you checked AUTO CONNECTION under connection mode – Be sure Auto-Calc Code and Auto-Unlock Modem are both marked – Click READ MDM DATA – Now click UNLOCK. This should both unlock your modem and reset the counter at the same time – Lastly, click on Calculate to generate the flash code. You’re gonna be needing it later. Must Read: 2. Upgrade your Modem Firmware – First, you must download the right firmware for your modem. You can download it from their but I prefer and recommend Update: These sites don’t seem to have the firmwares anymore.

You can always check, or website. – Select Huawei or what model your modem is and click the tiny modem icon – On the next page, select your model and click the same modem icon again. – Now, download Firmware Update and Dashboard Update Now to upgrade the firmware, unzip the firmware update you downloaded and double-click the.exe file. – Accept the agreement and proceed. – The program searches for your modem for some seconds – On the next page, simply hit the Next button – When the flashing starts, be sure you follow the instruction on-screen. Do not remove your modem and be sure you have enough poer on your laptop or UPS to last for about 30 minutes. – When you hit the start button, you may be prompted to enter your Flash code.

This only happens when the new firmware version is different from the existing one on the device. Remember the Flash code you generated earlier? Enter it here.

– The process starts and normally, this should take less than 10 minutes. – At this point, you don’t have to do anything. Just wait till you see a message that looks like this: – Congratulations!

You just upgraded you modem firmware successfully! Installing a different dashboard Even with an upgraded firmware, I was still seeing that same dashboard that came from 3 network. The dashboard wouldn’t let any me use any other SIM though the modem is already unlocked. I had to install a different dashboard to make me use our network provider settings here in Nigeria. It’s here you’ll be needing the Dashboard Update file you downloaded.

– Unzip the file and run the executable file – Accept the agreement and continue – Again, the software should search for your device -Hit the Next button as before and the procedure is very much similar to the firmware upgrade you did earlier. Easy, isn’t it? It’s more like installing a software on your computer.

Also, this should take less than five minutes to complete and after that, you should have a different modem software that’s not branded with your home network logo and customizations. Now you’ve successfully flashed your modem.

I used this method to flash a “permanently locked” modem with 10 wrong unlock attempts and it worked fine. Filed Under: Hashtags.

I got error to reset lock counter on my airtel 3g modem E1731 I follow your above steps but my modem doesn’t accept the counter reset code. Here is my details of my modem. Found modem: E1731 Model: Huawei E1731 (Airtel India) IMEI: 73093 Serial NR.: 8CABYA Firmware: 11.126.29.00.284 Compile date / time: Aug 13 2012 19:28:09 Hardware ver.: CD1E153M Dashboard version: UTPS23.001.07.06.910_LNX23_myModem.in Chipset: Qualcomm MSM6290 Voice feature: disabled SIM Lock status: Locked (customized firmware) Wrong codes entered: 10 (unlock attempts left: 0). I already followed many tutorials and at last I unlocked my huwaei ec156 modem which was given me with my tata photon+ connection.Though I unlocked it using DFS and followed all d procedures without any fail. Ultimately,I downloaded the firmware of my device from huwaei, it is ” EC156Update_11.106.00.06.000.B416.exe”. Please help me out I have crazy john’s huawei e173 datacard from australia, i have directly reinstalled the mobile patner software, with out updating the frimware, now the dongle is not working only green light blinks often. I have tried to reinstall the frimware n dashboard but the software says no device detected.

Mujhse dosti karoge movie download single link. It shows error msg 2 “The data card can not be found Error code:2 One of the following reasons may cause the errors: a. The data card in not connected to PC. Other program is using the data card. You don not have the authority of the administrator.” I have also tried by changing the sim but result is the same.

Please help me to get it unlocked. Thanks in advance. Av Bishoujo Senshi Girl Fighting.

Hi, I have this crazy E173 3.75G airtel modem. The first time i slotted-in a different sim, i was told invalid sim. I got interested in unlocking the modem after reading your blog. I downloaded the dc unlocker u made avaiable on your blog page, i was given an error code, helix string and some craps i don’t understand. I even tried using the Huaweii modem unlocker (also from your blog), updated the firm ware and the dash board using the methods u described. My crazy modem still refuses to unlock. Please, I need your help.

Hello Don, I recently gave my son a Huawei USB modem which was initially working properly with a boardband dashboard. But now whenever I connect it to the laptop, it has a mobile partner dashboard and the Huawei e160 modem gives error: “device is disconnected or is unavailable”. The boy had tried to flash it. I have tried connecting the device to some other computers to see if the device gets detected, I am getting the same problem. It is faulty and the computers cannot communicate with the device again.

I’ll appreciate Thanks in advance. How can I find the firmware for Found modem: E5220s-2 Model: Huawei E5220 IMEI: 06211 Serial NR.: E6BBY1 Firmware: 21.143.15.00.999 Compile date / time: Nov 07 2013 11:45:50 Hardware ver.: CH1E5220SM Dashboard version: UTPSTOOL-ConnLaucher_WIN1.12.07.00_MAC1.12.08.00 Voice feature: unknown(read failed)(read failed) SIM Lock status: unlocked Wrong codes entered: 0 (unlock attempts left: 10) as in the installed cooked firmware, I cannot add or change the Network profile (APN) Anybody can help, please!!!

I have a airtel 3G E8231 huawei wingle modem. A few days ago I have download two files from net 1) E8231 firmware update-india version, 2) hilin dashboard webui 13.100.00.01 life belarus and keep it in a folder in pc E drive. Then accidentally I select file 2) hilin. For firmware update of my modem instead of E8231 firmware update.

Thereafter my modem is in half dead condition. Just I connect my modem in the pc a web page Altel 4G dashboard and modem is neither connect to net nor wifi signal is found. Is there any solution or it will throw in dustbin? That huawei modem unlocker software is just the bomb dude.

Where the heck you got it from by the way? I have been able to permanently unlock my modem with that for months without a problem. It can even upgrade my speeds. My modem is huawei e173 u-1.

It seems the firmware is locked completely but huawei modem unlocker software has helped me use my modem like a piece of cake just with temporary unlocking. But do you know of similar software for Ubuntu linux? You guy are a genius by the way. Hi Bro, I am facing below problem, as i followed your steps giving below error Details are like below DC – Unlocker 2 Client 1.00.0460 Detecting card: selection: manufacturer – ZTE datacards model – Auto detect Found modem: MF190 Model: Unknown ZTE modem IMEI: 68175 Firmware: ZTMF190DT02 SIM Lock status: Locked (Card Lock) Unlocking, please wait Security data error! Unlock failed! (error code 84) Could you please give me Solution of it.

Thanks & Regards, Majed Khan. Good day sir, pls am having a problem trying to flash my modem, i downloaded the firmware from huaweifirmwares,com, its a e173-u2 firmware. The problem is that it wont install after download. After accepting, it show searching for data card.

After searching for sometime time, it will say error. Data card not properly place on pc or its currenlt being used by another application or not authorized from administrator. Pls what do i do or how do i go about it? I already generated the new algo unlock code and flash code. Flashing the firmware is where the problem is now. Pls i need help on what to do about it or how to properly install the firmware to detect the data card.

Dear Don, I just stumbled upon this page, And I was looking for a solution / work around on an issue that I am facing, I recently purchased a Huawei E303 Data Stick from UK which is an unlocked, and it is currently on HiLink Version of software, I require to downgrade it but to my luck no previous versions detect the modem as the communication does not show / transmit through COM Ports. I require to downgrade this device to an older version in order to detect it as a Serial Modem where I could do some tests on this device but due to it being Hi-Link version I am unable to do so Any Suggestions? Hi Don, I have a Datacard, Huawei E3276s-920, Firmware Version: 21.260.05.00.209, Software Version: 23.015.02.00.03.

Connection Manager( Mobile Partner 23.015.02.00.03) has some features deactivated like USSD, Data Volume Limit etc. I have customized Mobile Partner Software by Editing in some config files inside and made active as per my required features and archived( Common+SysConfig.dat) to data.bin,now clicking on setup.exe,it is installed manually and working fine. I am not using original auto installed Software. How can I flash this customized software into the modem permanently. Please tell me the procedures in details.

Excellent tutorial. Was able to unlock and reinstall latest firmware to my Virgin Australia Huawei E1762 HSPA USB Modem while visiting India and then use local Indian sim card on my 3G WiFi Modem to get net access, this was a great help.

All up took approximately 45 minutes to 1 hour including removing the bloatware dashboard, which I had to google around for a bit as the link to the dc-files website is obsolete and the dashboard file wasn’t quickly identifiable for my device. Tested and USB stick worked on Airtel and Vodafone. So permanently unlocked, rebooted and now online. This will also benefit me when I head back home and also when travelling to other countries now.

The robots are coming.

• Download all the software / firmware from the link which is provided at the end of the article. • Now run Universal Master code software, select Huawei tab and generate flash code for your modem.

• Now run the download firmware file of Huawei E303 modem and when ask for password / flash code then provide the flash code (which you generated earlier) as your password. • Now wait for finish the flash process. • Now Close any runing software / dashboard / connection manager.

• Run the CardLock_Unlock software / tool. • Now put your 8 digit unlock code into the unlock code box and click on OK. • Now you will get message “Unlock Success”.